Cheap Computers and Parts

Step 1: Locate location to mount the power supply

On the back of the case is a giant square hole with four screw holes. This obviously, is where the power supply goes.

Step 2: Align the screw holes

To install the power supply, simply align the screw holes and place it inside the case.

Step 3: Mount the power supply

Slide the power supply back until it hits the wall of the case. Ensure the screw holes line up one last time.

Your case should have come with four screws for the power supply. Use these to complete the installation.

Next Lesson: Mounting the Motherboard

In the next lesson, we will mount the motherboard to the case: Lesson 10: Mounting the Motherboard.